High quality 9 inch 12V vehicle TFT LCD roof mounted monitor

roof mounted monitor * Voltage: DC 12V; * Image switch:16:9 or 4:3; * Pixel: 800*600; * Display method: TFT active matrix

High quality 9 inch 12V  vehicle roof mount TFT LCD monitor/TFT roof mount monitor/LCD monitor/9 inch monitor/12V lcd monitor

FRONT PANEL

1. IR sensor

2. Power on/off

3. Positive adjustment

4. MENU:Contrast-Brightness-Saturation-Hue-Volume-Mode select-Source input

5. Negative adjustment

6. Monitor release button

Press it to release the monitor

7. Dome light

REMOTE CONTROL

1. Power: press to power on/off the monitor

2. Video select:V1/V2 switch

3. <-: press to decrease the value

    ->: press to increase the value

4. Menu: Press to active the OSD menu, it shows brightness-contrast-color-tint-default

5. Image switch 16:9 or 4:3

INSTALLATION

The device is an overhead, fold-down monitor with an infrared IR eye. it will accept 2 video signal from any video sources with composite video out.

1. Look over the vehicle for  a location for the monitor. Each vehicle is different and locations will vary. Make Sure the monitor will not interfere with the Driver.

2. Once a location has been determined, connect the IR, A/V RCAs and Power cables to the designated sources.

3. Feed the cables thourgh the hole in the mounting bracket and screw the bracket to the headliner. Use short screws so as not to damage the roof.

4. Mount the monitor with the provided hardware.

SPECIFICATION

screen size	9 inch
system	PAL&NTSC
display method	TFT Active matrix system
display ratio	4:3
pixel	800*600
power supply	DC12V(+/-10%)
power consumption	18W
weight	1.5g

PACKING INFORMATION

Carton size	33*33*8cm
Net weight	1.4KG
Gross weight	1.51KG

PRECAUTIONS

The set is for use in DC 12V, negaiveground vehicles.

Do not operate the set in ways other than described in this guide. Doing so many damage it and many void your warranty.

SAFETY FIRST!FOR REAR SEAR VIEW USE ONLY.Don not install on dashboard or anywhere else that would permit monitor to be viewed by the driver. Monitor must never be used in any manner that will distract driver or interfere with the drvier's safe operation of the motor vehicle.

Be careful not to run down the car battery while using the set with the car stopped.

Don not disassemble or modify the set. Doing so may damage it and voids your warranty. Keep drinks and drops from umbrellas away from the set. Water may damage the internal circuitry.

Don not let the set become hot.If temperature in the car is high or the set has been exposed to direct sunlight and is hot, lower the temperature before using it.

In extremely cold temperatures, the movement of the picture may be slow and the picture may be dark, but this is not a malfunction. The set will work mormally once the temperature increase.

Small black and shiny dots inside the liquid crystal  panel are n ormal for liquid crystal product.

CONNECTING DRAWING

PICTURE FOR REFERENCE

OUR PROMISE

* All our product is inspected carefully by our quality department.

* We are top three in this area in the domestic market. We will provide customer with the most competitive price.

* All popular product has enough stock so that to garantee delivery time.

* Welcome to chat with me about detailed information!

Certificate:

High quality 9 inch 12V vehicle TFT LCD roof mounted monitor